AUTOMATIC GAUZE BANDAGE ROLLING EQUIPMENT

 It is electrical-mechanic equipment for automatic rewinding of non-elastic gauze bandages. All the production parameters are set on the English-version touch-screen control panel in this equipment. The loading of big bandage roll and taking the ready-made small bandage rolls at the basket (box) under the output are manually.

1. Input Width: Non-elastic gauze bandage in big roll of width from 5cm (Min) to 15cm (Max).

2. Bandage roll: Lengths from 1.5 to 10 meters adjustable and width from 50, 75, 100, 150mm adjustable.

3. Inner Diameter of bandage roll: From 16mm to 20mm depends on the width of bandage roll.

For 15cm width bandage roll, the inner diameter will be 18mm (1.8cm)

4. Production Capacity: There are 3 production tracks. Each track makes 5 to 7 PCS of bandage rolls.

Production Capacity calculation method: To make 15cm wide x 4 meter long bandage roll in one minute, One track makes 5 Pcs to 7 Pcs bandage rolls, So, total capacity is 15 to 21 PCS per minute by 3 tracks. To make 4 meters length x 10cm width gauze bandage roll, you can make 8 rolls per track per minute. So, By 3 tracks, you will make 24 rolls per minute.

5. Lengthwise tolerance of ready-made bandage rolls is 3%. Regularity of both ends of bandage is 2mm to 3mm.

6. Electricity required: 380V 50Hz 3 Phase AC or 220V 60Hz 3 Phase AC.

7. Rated power: 3KW. h. Compressed air pressure required³0.5 Mpa

8. Labor: 1 person

9. Equipment size: 2200mm (L) * 1200mm (W) * 1800mm (H)

10. Net Weight: 700Kg.