200gsm speed |
7-7.5m/min Max |
FINAL PRODUCT WIDTH |
3200mm |
CAPACITY |
300kg/h |
PRODUCT WEIGHT |
60-1800g/m2,FREE-GLUE 60-1500g/m2 |
THICKNESS |
10-150mm |
MATERIALS |
POLYESTER HOLLOW , POLYPROPYLENE , BIOFIBER ,4080LOW MELT |
WHOLE SET ELECTRIC CONTROLLING CABINATE |
Width |
1000mm |
overall |
5200x1320x2500 |
Control mode |
double hopper open and close |
weight tolerance |
+/-5g |
max weight |
1200g/hopper |
power |
4.5kw |
capacity |
15-100kg/h (each machine) |
scale mode |
electric |
Pre-open and fine open are a little different, all kinds of chemical fibers and leftovers then conveyed into next process by fan. Powerful magnet is equipped to remove metallic impurity during conveying, conveying photo electricity controlled.
Cylinder dia. |
500mm |
Overall |
6400*1600*1000mm |
Machine width |
1500mm |
Capacity MAX. |
320 kg/h |
Power |
6.95 kw |
3)LDJK-150 fine open
Width |
1500mm |
Overall |
3500*1600*3200mm |
Power |
6.95kw |
capacity |
320kg/h |
Machine width |
1850mm |
Capacity |
320 kg/h |
Power |
2.25 kw |
Two photo electricity controller and variable plate , TD> |
|
First control fiber quantity, second control fiber web and evenness |
It can use 4D-15D x 60-102mm polyester, pp fiber etc. Single-cylinder, double doffer double messy structure of high-speed carding, the rollers are qualitative, quenching and tempering, precision machining; Shanghai famous brand clothing matching are used; roller into the cotton, a cotton doffer regulated by variable frequency control; cut knife Stripping cotton, feed feeding protection against metal.
Machine width |
2500mm |
Main cylinder dia. |
1230 mm |
Capacity |
320 kg/h |
Web speed |
max 45m/min |
Doff dia. |
492 mm |
Power |
24 kw |
Machine weight |
10,000kg |
Output |
3600mm |
Input |
2700mm |
Output speed |
1-12 m/min |
Web speed |
20-45 m/min |
Power |
7.5 kw |
Slant curtain, middle curtain and bottom curtain are controlled with inverter. |
|
Web forming curtain is controlled with subsection of A.C. frequency converter and insrue the uneven</=5%. |
|
The machine frame is made with steel board. |
7)LD-360 drying oven.1 set
Heating wind by fan pass through web to heat . Teflon belt hold web, upper belt can move vertically, outlet with colling press roll, and cooling fan blow can gas burning or heating air.
Length |
12000mm |
Width |
3600mm |
Temp. |
< 220 C |
Speed |
1-18m/min frequency |
Gas burner |
2x320,000 kcal |
Power |
main drive 5.5kw frequency Fan 7.5 kw x2 Draw fan 1.5 kw Cooling fan 2.2kw |
cooling roller width 3600 , diameter 240mm. |
Machine frame: two side steel wall, and support, input frame, and output frame, materials A3, 10mm thickness steel plate.
Main spec.
Speed |
10m/min |
Nominal width |
3200mm |
Pressure type |
worm wheel adjust press |
Max. pressure |
1.5 tons |
Upper roller dia |
400mm |
Down roller dia. |
400mm |
Heating power |
54 kw |
Cooling |
natural cool |
Drive type |
frequency converter adjust speed |
Heat deformation |
less than 15um |
Total power |
56.2 kw |
Weight |
3 tons |
Roller heating type |
oil electric heating directly |
||
Temp. of roller surface |
less than 210C |
||
Two roller vertical type ure |
|||
Left or right hand |
|||
Temp can be set and controlled , surface of roller Cr alloy,finess less than 0.8 um |
|||
Electric control system: A. driving control system : motor is AC , frequency converter to adjust speed B. temp control system, controlled by the temp. Sensor inside roller, and temp. Control heating power. |
9)LD-320 slitting and wind machine
This machine is adopted with some cutters, transverse cutting is flying cutter, the diameter is ¢250; automatic electronic counter. Machine power: 3.75KW.
It has length measuring system.