machine frame:Include two side steel plate and machine support etc, A3 20mm thick steel plate
1 |
type |
Two roller vertical |
2 |
|
Right or left hand |
3 |
speed |
10m/min |
4 |
Roller width |
2500mm |
5 |
Upper roller adjustment |
worm gear up and down |
6 |
Lower roller |
Dia. 400mm |
7 |
Upper roller |
Dia. 400mm |
8 |
Roller heating methods |
electric heating conduct oil |
9 |
Heating power |
54kw |
10 |
Roller surface temp |
</=220 Degree |
11 |
Cooling methods |
Air cooling |
12 |
Driven methods |
Frequency converter |
13 |
Total power |
56.2kw |
14 |
Machine weight |
About 4.5tons |
15 |
Roller materials |
45# steel |
16 |
Roller surface thickness |
38mm |
FBHYTG-250 three roller ironing machine(PID temp. control)
machine frame:Include two side steel plate and machine support etc, A3 20mm thick steel plate
1 |
type |
Three roller vertical |
2 |
|
Right or left hand |
3 |
speed |
10m/min |
4 |
Roller width |
2500mm |
5 |
Upper roller adjustment |
worm gear up and down |
6 |
Upper and Lower roller |
Dia.400mm |
7 |
middle roller |
Dia.400mm |
8 |
Roller heating methods |
electric heating conduct oil |
9 |
Heating power |
74kw |
10 |
Roller surface temp |
</=220 Degree |
11 |
Cooling methods |
Air cooling |
12 |
Driven methods |
Frequency converter |
13 |
Total power |
78kw |
14 |
Machine weight |
About 6-7tons |
15 |
Roller materials |
45# steel |
16 |
Roller surface thickness |
38mm |
PID temp control methods: when temp approach the set value, only heating some percent, not 100% percent switch on or off. This will control temp very well, and not overheating, more life for heating bar.
Use stainless steel heating pipe, 9 pipe one roller.
Suggest buy 9 roller to standby.